Differences in File and Printer Sharing in Windows Vista

File and Printer sharing is different in Vista .Kindly check the Article to observe the new changes and it will also help in troubleshooting .

The differences in file and printer sharing in Windows Vista are the following:

  • The default workgroup name in Windows Vista has been changed to WORKGROUP. In Windows® XP Home Edition, the default workgroup name is MSHOME. If you upgrade a computer running Windows XP Home Edition to Windows Vista, it will keep its existing workgroup name. However, new computers with Windows Vista can have a different workgroup name than the other computers on your network. With different workgroups, it takes more time and effort to view all of the computers on the network.

  • Windows Vista uses the Public folder, rather than the Shared Documents folder in Windows XP, to simplify file sharing. With Public folder sharing enabled, the public folders and all of the folders within the Public folder are automatically shared with the name Public. You do not have to configure file sharing on separate folders. You only have to either move or copy the file or folder you want to share on the network to the Public folder.

  • Windows Vista by default does not allow simple file sharing. Access to shared folders, including the public folder (if shared), requires a user name and password. Simple file sharing is enabled by default in Windows XP Home Edition.

Configuring File and Printer Sharing Behavior in Windows Vista

Configuring file and printer sharing behavior in Windows Vista consists of the following:

  • Setting the workgroup name to be the same as the other computers

  • Setting the network location type

  • Enabling file and printer sharing options

Setting the Workgroup Name

For easier and faster discovery of computers on your home network, it is highly recommended that all computers on a home network be configured for the same workgroup name. If computers are in multiple workgroups, it can take additional time and effort to discover all of the computers on the network.

To find out the existing workgroup name for a computer running Windows XP, do the following:

  1. Click Start, right-click My Computer, and then click Properties.

  2. In the System Properties dialog box, click the Computer Name tab and note the name of the workgroup.

Figure 1 shows an example.

Figure 1: The workgroup name in Windows XP

Figure 1: The workgroup name in Windows XP

To find out the existing workgroup name for a computer running Windows Vista, click Start, right-click Computer, and then click Properties.

In the System window, the workgroup name is listed in the Computer name, domain, and workgroup settings section. Figure 2 shows an example of the System window with the workgroup name highlighted.

Figure 2: The workgroup name in Windows Vista

Figure 2: The workgroup name in Windows Vista

To configure the workgroup name for a computer running Windows Vista:

  1. In the Computer name, domain, and workgroup settings section of the System window, click Change settings.

  2. On the Computer Name tab of the System Properties dialog box, click Change.

  3. In the Computer Name/Domain Changes dialog box, type the name of the workgroup being used by the other computers on your network in Workgroup, and then click OK. Figure 3 shows an example.

  4. When you are prompted with a welcome message box, click OK. When prompted with a message box to restart your computer, click OK.

  5. Click Close. When prompted to restart the computer, click Restart Now.

Figure 3 shows an example of the Computer Name/Domain Changes dialog box.

Figure 3: An example of the Computer Name/Domain Changes dialog box

Figure 3: An example of the Computer Name/Domain Changes dialog box

Setting the Network Location Type

The network location type in Windows Vista is a setting that allows Windows Vista to automatically configure security and other settings based on the type of network to which the computer is connected. The Windows Vista network location types are the following:

  • Domain The computer is connected to a network that contains an Active Directory domain controller for the domain to which the computer is joined. An example a domain network type is an organization intranet.

  • Public The computer is connected to a network that has a direct connection to the Internet. Examples of public network types are public Internet access networks such as those found in airports, libraries, and coffee shops.

  • Private The computer is connected to a network that has some level of protection from the Internet and contains known or trusted computers. Examples of private network types are home networks or small office networks that are located behind an Internet gateway device that provides firewalling against incoming traffic from the Internet.

For small office or home office networks, you want to make sure that the network location type is set to private.

To view the current network location type, do the following, click Start, right-click Network, and then click Properties.

The Network and Sharing Center window displays the network location type in parentheses after the network name. Figure 4 shows an example of the Network and Sharing Center window with the network location type highlighted.

Figure 4: An example of the Network and Sharing Center window

Figure 4: An example of the Network and Sharing Center window

If your network type is Public, do the following:

  1. To the right of the network name and location type, click Customize.

  2. In the Set Network Location dialog box, click Private, and then click Next.

  3. In the Successfully set network settings dialog box, click Close.

Enabling File and Printer Sharing Options

By changing your network location type to private, network discovery is automatically enabled in the Sharing and Discovery section of the Network and Sharing Center window. The following additional file and printer sharing options must be manually enabled:

  • File sharing

  • Public folder sharing

  • Printer sharing

  • Password protected sharing

When all of these sharing and discovery options are enabled, your computer can:

  • Locate other computers and devices on your home network and have other computers locate your computer

  • Share its folders

  • Share its Public folder

  • Share its printers

  • Require user names and passwords for other computers that connect to the shared folders and printers of this computer

To enable file sharing, do the following:

  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to File sharing.

  2. Within the File sharing settings, click Turn on file sharing, and then click Apply.

To enable public folder sharing, do the following:

  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to Public folder sharing.

  2. Within the Public folder sharing settings, click one of the following:

    • If you want to share the public folder so that other computers on the network can access the Public share to open files, but not create or change files, click Turn on sharing so anyone with network access can open files. This is the default setting.

    • If you want to share the public folder so that other computers on the network can access the Public share to open files and also create or change files, click Turn on sharing so anyone with network access can open, change, and create files.

  3. Click Apply.

To enable printer sharing and share all of your connected printers, do the following:

  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to Printer sharing.

  2. Within the Printer sharing settings, click Turn on printer sharing, and then click Apply.

To enable password protected sharing, do the following:

  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to Password protected sharing.

  2. Within the Password protected sharing settings, click Turn on password protected sharing, and then click Apply.

Password Protected Sharing

With password protected sharing enabled, other computers on your network will not be able to access your shared folders, including the Public folder, without a user name or password that corresponds to a user account on the computer with the shared folder. When a user on another computer tries to connect to the shared folder, they will send the user name and password of the account that they used to log on to their own computer. For example, if they logged on to their computer with the “Bob” account and a password, then the “Bob” name with its password is sent when connecting to a shared folder on another computer.

If there is a “Bob” account with its password on the computer that is sharing the folder, the shared folder connection will be successful (provided the "Bob" account is specified as one of the accounts that can access the share). However, if there is no “Bob” account on the computer that is sharing the folder, the shared folder connection will fail and the user on the other computer will be prompted with a dialog box to type in a user name and password. At this point, the user on the computer attempting to connect can type the name and password of an account on the computer sharing the folder that is specified as one of the accounts that can access the share.

To prevent shared folder connection failures, you can do one of the following:

  • Add the same accounts and passwords to all of the computers on your network

    For example, if you have three computers in your home and four family members that use them, add all four accounts with their passwords corresponding to your family members to all three computers. When this is done, each family member can access the shared folders of the other computers, regardless of which computer they are using. This is the recommended method, which provides protection of shared folders and prevents shared folder connection failures.

  • Disable password protected sharing

    When you disable password protected sharing, the computer sharing the folder does not require a user account or password. Anyone on your network can access the shared folders of the computer (provided the folder was shared for the Guest or Everyone account). This behavior is equivalent to simple file sharing in Windows XP.

To disable password protected sharing, do the following:

  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to Password protected sharing.

  2. Within the Password protected sharing settings, click Turn off password protected sharing, and then click Apply.

Sharing a Folder or Printer in Windows Vista

To share a folder in Windows Vista, do the following:

  1. Ensure that file sharing is enabled as described in the “Enabling File and Printer Sharing Options” section of this article.

  2. Click Start, and then click Computer.

  3. In the Computer window, navigate to the folder containing the folder that you want to share.

  4. Right-click the folder that you want to share, and then click Share. The File Sharing window is displayed.

  5. If you have password protected sharing enabled, use the File Sharing window to select which users can access the shared folder and their permission level. To allow all users, select Everyone in the list of users. By default, the permission level for a selected user is Reader. Users cannot change files or create new files in the share. To allow a user to change files or folders or create new files or folders, select Co-owner as the permission level. Figure 5 shows an example of configuring users and permission levels in the File Sharing window.

    If you have password protected sharing disabled, use the File Sharing window to select the Guest or Everyone account. This is equivalent to simple file sharing in Windows XP.

  6. When complete, click Share, and then click Done.

Figure 5: An example of the File Sharing window

Figure 5: An example of the File Sharing window

You can also share a folder from the folder’s properties by doing the following:

  1. In the Computer window, navigate to the folder containing the folder that you want to share.

  2. Right-click the folder that you want to share, and then click Properties. Windows Vista displays the folder properties window.

  3. Click the Sharing tab. Figure 6 shows an example. Click Share for the File Sharing dialog box previously described. To configure advanced sharing options, click Advanced Sharing.

Figure 6: An example of the Sharing tab for the properties of a folder

Figure 6: An example of the Sharing tab for the properties of a folder

When you click Advanced Sharing, Windows Vista displays the Advanced Sharing dialog box. Figure 7 shows an example.

Figure 7: An example of the Advanced Sharing dialog box

Figure 7: An example of the Advanced Sharing dialog box

From this dialog box, you can do the following:

  • Create more than one share for the same folder with different share names.

    Click Add to specify the new share name, a description for the share, the number of users allowed to connect, and share permissions (by default, the Everyone group has Read permissions).

  • Specify the maximum number of users that can be connected to the shared folder.

    In Limit the number of simultaneous users to, specify 1 to 10.

  • Add a comment to the shared folder that appears to users when they are browsing for shared folders.

    Type a description for the share in Comments.

  • Specify folder share permissions.

    Click Permissions to specify individual user or group names and their permissions to access the files in the shared folder. Figure 8 shows an example.

  • Specify whether the contents of the folders of the share can be made available offline.

    Click Caching and specify offline settings.

Figure 8: An example of the Permissions dialog box

Figure 8: An example of the Permissions dialog box

To verify that the folder is shared, do the following:

  1. Click Start, right-click Network, and then click Properties.

  2. Under the Sharing and Discovery section of the Network and Sharing Center window, click Show me all the shared network folders on this computer.

A window displays the shared folders and printers. Verify that the window contains the folder that you just shared. Figure 9 shows an example.

Figure 9: An example of the list of shared folders and printers

Figure 9: An example of the list of shared folders and printers

If you share any folder within your user folder (click Start, and then click your user name), such Documents or Pictures, then other computers will see a folder named Users in the list of shared folders on this computer. For example, if the user Bob shares his Desktop folder on his computer named BobPC, it means that Bob has shared his c:\users\bob folder, which includes the Desktop folder. Bob’s Desktop folder is now available at \\bobpc\users\bob\desktop.

Sharing Your Printers

To share your printers in Windows Vista, ensure that printer sharing is enabled as described in the “Enabling File and Printer Sharing Options” section of this article.

To verify that your printers are shared, do the following:

  1. Click Start, right-click Network, and then click Properties.

  2. Under the Sharing and Discovery section of the Network and Sharing Center window, click Show me all the shared network folders on this computer.

  3. In the list of shared resources, verify that your printers are listed.

Accessing a Shared Folder or Printer with Windows Vista

To access a shared folder from a computer running Windows Vista, do the following:

  1. Click Start, and then click Network. The Network window displays a list of computers in the workgroup of the computer. Figure 10 shows an example.

  2. Double-click the name of the computer containing the shared folder that you want to access.

  3. Double-click the shared folder that you want to access.

Figure 10: An example of the Network window

Figure 10: An example of the Network window

If the shared folder is on a computer running Windows Vista that has network discovery enabled, it should appear in the Network window quickly. If the computer containing the shared folder is on a computer running Windows XP, it might take up to 15 minutes for the computer to appear in the Network window.

If the computer that you are trying to access has password protected sharing enabled, the possibilities are the following:

  • If you are logged in using a user account that has been added to the computer sharing the folder and that name has been added to the list of users who have access to the folder, the shared folder connection will be successful.

  • If you are logged in using a user account that has not been added to the computer sharing the folder, you will be prompted to provide a user name and password of an account on the computer sharing the folder that has been added to the list of users who have access to the folder.

  • If you are logged in using a user account that has been added to the computer sharing the folder but has not been added to the list of users who can access the share, the shared folder connection will be denied.

If the computer that you are trying to access has password protected sharing disabled, the possibilities are the following:

  • In most cases, the access to the shared folder will be successful without prompting for a user name and password.

  • In some cases, you will be prompted to provide a user name and password. You should type the name guest with no password to access the shared folder.

  • If the shared folder does not have the Guest or Everyone account in its list of allowed users, shared folder access can fail even after prompting you for the name of the Guest account. To correct this, add the Guest or Everyone account to the list of allowed users on the share.

Accessing a Shared Printer

To access a shared printer from a computer running Windows Vista, do the following:

  1. Click Start, and then click Network. The Network window displays a list of computers in the workgroup of the computer.

  2. Double-click the name of the computer containing the shared printer that you want to access.

  3. Right-click the shared printer that you want to access, and then click Connect. Alternately, you can double-click on Printers to see just the list of shared printers, and then right-click the shared printer that you want to access, and then click Connect.

After you have connected to the shared printer, you will be able to print to this shared printer as long as the printer and the computer sharing the printer are turned on.


 
By Sudarshan A   Popularity  (1848 Views)