SQL Server - need help in sql 2008 installtion as i am getting some errors

Asked By SVK N on 23-Apr-11 05:08 AM
i am installing sql2008 server
i am at SERVER configuration section i get sme erorrs in it , assistance needed immediately

SQL Server Agent

SQL Server Database Engine
SQL Server Reporting Services

the account name & passowrd is balnk wht shld i put in??
]
SQL Full-text Filter Daemon Launcher
SQL Server Browser
are having NTAUTHORTY


Riley K replied to SVK N on 23-Apr-11 05:20 AM

By default, no accounts are setup to run SQL Server services. You will have to provide those accounts. You can use the same account for all of them. Be sure not to use an existing user's account since this is not a Best Practice. I went ahead and created a local account called "svc_sql" to handle the SQL Server service starting and stopping.

http://2.bp.blogspot.com/_BVcJoi56t9c/SNL9O_lqhzI/AAAAAAAAAD0/ybWvXAv-l30/s1600-h/sql007.jpghttp://2.bp.blogspot.com/_BVcJoi56t9c/SNL9PN6ZFWI/AAAAAAAAAD8/cSrjjAPfn8Q/s1600-h/sql008.jpg

Here you have a choice of setting up Windows mode or Mixed mode. Windows mode will only allow WorkGroup or Domain Accounts to log onto the SQL Server. Mixed mode will allow you to use WorkGroup, Domain Accounts and SQL Server accounts. If you plan to use Mixed mode, you will have to supply a strong password for the SA account (default SQL Server login account).

http://4.bp.blogspot.com/_BVcJoi56t9c/SNL9PKU3N1I/AAAAAAAAAEE/6KrCmhxNx08/s1600-h/sql009.jpg

Next, you can set up SQL Administrators from this page (Account Provisioning).

http://1.bp.blogspot.com/_BVcJoi56t9c/SNL9PUyz60I/AAAAAAAAAEM/3-GK8U4Sd-8/s1600-h/sql010.jpg
SVK N replied to Riley K on 23-Apr-11 06:03 AM
TITLE: Connect to Server
------------------------------

Cannot connect to (local).

------------------------------
ADDITIONAL INFORMATION:

A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------

i get the above error when i try to login after the installation
Ravi S replied to SVK N on 25-Apr-11 07:00 AM
Hi svk

Follow these steps

  1. Insert the SQL Server installation media. From the root folder, double-click Setup.exe. To install from a network share, locate the root folder on the share, and then double-click Setup.exe. If the Microsoft SQL Server 2008 Setup dialog box appears, click OK to install the prerequisites, then click Cancel to exit SQL Server installation.

  2. If the .NET Framework 3.5 SP1 installation dialog box appears, select the check box to accept the .NET Framework 3.5 SP1 License Agreement. Click Next. To exit SQL Server installation, click Cancel. When installation of .NET Framework 3.5 SP1 is complete, click Finish.

  3. Windows Installer 4.5 is also required, and might be installed by the Installation Wizard. If you are prompted to restart your computer, restart it, and then restart SQL Server Setup.exe.

  4. When the prerequisites are installed, the Installation Wizard runs the SQL Server Installation Center. To create a new installation of SQL Server, click New Installation or Add Features to an Existing Installation.

  5. The System Configuration Checker runs a discovery operation on your computer. To continue, click OK. If Setup detects SQL Server 2008 on the machine, you will see a warning about the automatic upgrade of shared components to SQL Server 2008 R2. For more information about side-by-side instances of SQL Server 2008 R2 and SQL Server 2008, see http://msdn.microsoft.com/en-us/library/ee210714.aspx. Setup log files are created for your installation. For more information, see http://msdn.microsoft.com/en-us/library/ms143702.aspx.

  6. On the Language Selection page, you can specify the language for your instance of SQL Server if you are installing on a localized operating system and the installation media includes language packs for both English and the language corresponding to the operating system. For more information about cross-language support and installation considerations, see http://msdn.microsoft.com/en-us/library/ee210665.aspx.

    To continue, click Next.

  7. On the Product Key page, select an option button to indicate whether you are installing a free edition of SQL Server, or a production version of the product that has a PID key. For more information, see http://msdn.microsoft.com/en-us/library/ms144275.aspx.

  8. On the License Terms page, read the license agreement, and then select the check box to accept the license terms and conditions. To help improve SQL Server, you can also enable the feature usage option and send reports to Microsoft.

  9. The System Configuration Checker verifies the system state of your computer before Setup continues.

  10. On the Feature Role page, select SQL Server Feature Installation, and then click Next to continue to the Feature Selection page.

  11. On the Feature Selection page, select the components for your installation. A description for each component group appears in the right pane after you select the feature name. You can select any combination of check boxes. For more information, see http://msdn.microsoft.com/en-us/library/ms144275.aspx.

    You can also specify a custom directory for shared components by using the field at the bottom of the Feature Selection page. To change the installation path for shared components, either update the path in the field at the bottom of the dialog box, or click Browse to move to an installation directory. The default installation path is C:\Program Files\Microsoft SQL Server\100\.

  12. On the Instance Configuration page, specify whether to install a default instance or a named instance. For more information, see http://msdn.microsoft.com/en-us/library/ms143531.aspx. Click Next to continue.

    Instance ID — By default, the instance name is used as the Instance ID. This is used to identify installation directories and registry keys for your instance of SQL Server. This is the case for default instances and named instances. For a default instance, the instance name and instance ID would be MSSQLSERVER. To use a nondefault instance ID, select the Instance ID check box and provide a value.


    Typical stand-alone instances of SQL Server 2008 R2, whether default or named instances, do not use a nondefault value for the Instance ID check box.

    Instance root directory — By default, the instance root directory is C:\Program Files\Microsoft SQL Server\100\. To specify a nondefault root directory, use the field provided, or click Browse to locate an installation folder.

    All SQL Server service packs and upgrades will apply to every component of an instance of SQL Server.

    Detected instances and features — The grid shows instances of SQL Server that are on the computer where Setup is running. If a default instance is already installed on the computer, you must install a named instance of SQL Server 2008 R2.

  13. The Disk Space Requirements page calculates the required disk space for the features that you specify. Then it compares the required space to the available disk space. For more information, see http://msdn.microsoft.com/en-us/library/cc707788.aspx.

  14. Work flow for the rest of this topic depends on the features that you have specified for your installation. You might not see all the pages, depending on your selections.

  15. On the Server Configuration — Service Accounts page, specify login accounts for SQL Server services. The actual services that are configured on this page depend on the features that you selected to install.

    You can assign the same login account to all SQL Server services, or you can configure each service account individually. You can also specify whether services start automatically, are started manually, or are disabled. Microsoft recommends that you configure service accounts individually to provide least privileges for each service, where SQL Server services are granted the minimum permissions they have to have to complete their tasks. For more information, see http://msdn.microsoft.com/en-us/library/cc281953.aspx and http://msdn.microsoft.com/en-us/library/ms143504.aspx.

    To specify the same logon account for all service accounts in this instance of SQL Server, provide credentials in the fields at the bottom of the page.

    Security Note   Do not use a blank password. Use a strong password.

    When you are finished specifying login information for SQL Server services, click Next.

  16. Use the Server Configuration — Collation tab to specify nondefault collations for the Database Engine and Analysis Services. For more information, see http://msdn.microsoft.com/en-us/library/cc281995.aspx.

  17. Use the Database Engine Configuration - Account Provisioning page to specify the following:

    • Security Mode — select Windows Authentication or Mixed Mode Authentication for your instance of SQL Server. If you select Mixed Mode Authentication, you must provide a strong password for the built-in SQL Server system administrator account.

      After a device establishes a successful connection to SQL Server, the security mechanism is the same for both Windows Authentication and Mixed Mode. For more information, see http://msdn.microsoft.com/en-us/library/cc281849.aspx.

    • SQL Server Administrators — You must specify at least one system administrator for the instance of SQL Server. To add the account under which SQL Server Setup is running, click Add Current User. To add or remove accounts from the list of system administrators, click Add or Remove, and then edit the list of users, groups, or computers that will have administrator privileges for the instance of SQL Server. For more information, see http://msdn.microsoft.com/en-us/library/cc281849.aspx.

    When you are finished editing the list, click OK. Verify the list of administrators in the configuration dialog box. When the list is complete, click Next.

  18. Use the Database Engine Configuration - Data Directories page to specify nondefault installation directories. To install to default directories, click Next.

    Important noteImportant

    If you specify nondefault installation directories, ensure that the installation folders are unique to this instance of SQL Server. None of the directories in this dialog box should be shared with directories from other instances of SQL Server.

    For more information, see http://msdn.microsoft.com/en-us/library/cc281941.aspx.

  19. Use the Database Engine Configuration - FILESTREAM page to enable FILESTREAM for your instance of SQL Server. For more information, see http://msdn.microsoft.com/en-us/library/cc645996.aspx.

  20. Use the Analysis Services Configuration — Account Provisioning page to specify users or accounts that will have administrator permissions for Analysis Services. You must specify at least one system administrator for Analysis Services. To add the account under which SQL Server Setup is running, click Add Current User. To add or remove accounts from the list of system administrators, click Add or Remove, and then edit the list of users, groups, or computers that will have administrator privileges for Analysis Services. For more information, see http://msdn.microsoft.com/en-us/library/cc281723.aspx.

    When you are finished editing the list, click OK. Verify the list of administrators in the configuration dialog box. When the list is complete, click Next.

  21. Use the Analysis Services Configuration — Data Directories page to specify nondefault installation directories. To install to default directories, click Next.

    Important noteImportant

    If you specify nondefault installation directories, ensure that the installation folders are unique to this instance of SQL Server. None of the directories in this dialog box should be shared with directories from other instances of SQL Server.

    For more information, see http://msdn.microsoft.com/en-us/library/cc281997.aspx.

  22. Use the Reporting Services Configuration page to specify the kind of Reporting Services installation to create. Options include the following:

    • Native mode default configuration

    • SharePoint mode default configuration

    • Unconfigured Reporting Services installation

    For more information about Reporting Services configuration modes, see http://msdn.microsoft.com/en-us/library/ms144292.aspx.

  23. On the Error Reporting page, specify the information that you want to send to Microsoft to help improve SQL Server. By default, option for error reporting is enabled. For more information, see http://msdn.microsoft.com/en-us/library/ms144283.aspx.

  24. The System Configuration Checker will run one more set of rules to validate your computer configuration with the SQL Server features that you have specified.

  25. The Ready to Install page shows a tree view of installation options that were specified during Setup. To continue, click Install.

  26. During installation, the Installation Progress page provides status so that you can monitor installation progress as Setup continues.

  27. After installation, the Complete page provides a link to the summary log file for the installation and other important notes. To complete the SQL Server installation process, click Close.

  28. If you are instructed to restart the computer, do so now. It is important to read the message from the Installation Wizard when you have finished with Setup. For more information, see http://msdn.microsoft.com/en-us/library/ms143702.aspx.

Follow these links...You will find more details on installation of sqlserver2008
http://blogs.msdn.com/b/psssql/archive/2008/09/30/how-to-fix-your-sql-server-2008-setup-before-you-run-setup.aspx
http://blog.sqlauthority.com/2008/06/12/sql-server-2008-step-by-step-installation-guide-with-images/
http://www.sqlserverclub.com/essentialguides/how-to-install-sql-server-2008-step-by-step-guide.aspx